Що Майніт WhatsMiner

0 Comments

WhatsMiner Tools – Downloads App and Manuals [8.1.34]

is a useful free tool for setting up ASIC miners. The utility allows you to scan, monitor and manage ASIC WhatsMiner devices.

Whatsminertool is a utility similar to BTC Tools. Used to look up the IP address, change the configuration (including pools, network, ntp servers, etc.), update the firmware and determine the information/status of your ASIC miner. The software is developed by Shenzhen MicroBT Electronics. 1 .

Overview of features and options

List of remote control options: Mining Control : “Pause” or “Resume” miners.
Reboot : Reboots the selected devices.
Performance Mode : toggles the hashrate mode to “High”, “ Normal or Low.
Fastboot : speeds up ASIC startup.
Miner API Switch : Connect to API products like Foreman .
Restore DHCP : reverts miner to use DHCP (dynamic IP). It can automatically get an IP address.
Control LED Lights : turns the LED on or off to locate miner.
Protection Mode : enable/disable SSH .
Adjust Freq : adjusts the voltage and frequency of the miner (overclocking or underclocking).
Export Log : export power logs, miner logs, API logs , system logs and miner time.
Web pool switcher : Enables or disables the ability to configure pools via the web miner page.

To use the utility, you first need to prepare the ASIC Miner itself and plug it into the network.

ASIC setup

The machine is supplied with American and Chinese standard power cords. Connect your device to the network.

  • WhatsMinerTool can be run in 64-bit system on Windows 7-8-10-11 PC.
  • Suitable for WhatsMiner M3, M1, M10 and D1 series, M20, M21, M30, D1, M50 series.

Before setting up, make sure you have prepared everything you need:

  1. WhatsMiner is the device itself.
  2. Power supply (socket): 220-240 V.
  3. Adapted plug and power supply cable (16A, 250V).
  4. Network cables (Ethernet) and Internet speed > 10 Kbps.
  5. Computer with WhatsMiner Tool software.
  6. Mining pool accounts.

Connect the network cable and turn on the power. You will hear a very loud sound for the first few seconds. The fans will start the test by running at maximum speed.

Let’s move on to setting up WhatsMiner Tool.

How to use Whats Miner Tool?

Step 1 – download

Download the program from whatsminer official website. Or from the site Support center – WhatsMiner tools and firmware. Extract the WhatsMinerTool.zip archive and run the Windows executable. It’s called WhatsMinerTool.exe .

Step 2 – Start an ASIC IP search

Open WhatsMiner Tool, click IP Monitor , click Start . Press the button IP-found on the ASIC and hold it for two to three seconds. You will see the device IP in the program window. In the window Detect and Bind IP you will see the found IP address: Pay attention to the Source IP column (for example, 192.168.88.96) – this address must be copied. By default, the software is in the IP address range from 192.168.2.1 to 255. Then click Miner IP . You can add a specific address to monitor this machine, or a range of ip addresses to monitor a group of machines. In the Miner IP Management tab, you can add an IP range, import addresses, specify a comment, and tick the desired addresses.

Step 3 – Add Pools

Click the Pools button to add mining pools. Here worker means your pool account. It’s better to add at least two pools: Press the “Start” button. The Monitoring tab appears. The hashrate of all found devices is displayed here: The hash rate may fluctuate, but it will become stable after working for about 30 minutes. Watch the video guide:

After you find the IP address of the miner, you can start the device setup phase.

Firmware

  1. At this stage, you must select the ip of the devices you want to update.
  2. Select the update file by pressing the Select File button.
  3. Press the Start Upgrade button.

You can also click on the “Firmware Download Link” button in the utility to go to the official website for downloading firmware versions.

After selecting the update file, you do not need to do anything. You need to wait for the miner update process to complete. These steps take several minutes.

Do not turn off the device during the firmware process, otherwise the miner may fail! During the update, the device may reboot!

Once the upgrade process is complete, you can start mining of your desired digital currency again.

In the line with the selected miner in the “Status” column, the progress of the operation will be displayed:

After a while, the status will change to Running (normal operation).

Flashing the WhatsMiner control board with SD-card, to fix the software of the control board.

Settings

IP import

You can also import an IP address from a text file by clicking the “IP Import” button. The format of the .txt file is such that one IP address is placed on each line.

Example IP.txt file:

192.168.1.1 192.168.1.2 192.168.1.3 

Export

It is possible to save the data of the current page as a .csv file, where each column is separated by a character (‘;’). You can transfer data to Excel and edit it.

Remote control

Enabling “Remote Control” allows you to fully control the miners remotely. To do this, select your miner in the list, press the “Remote Ctrl” button and enable the API. You will also need to enable “Power Fast Boot” in order for the miner to start up quickly (important if you are into mining).

The following options are available here:

  • Reboot – reboot the device.
  • Mining Control – start/stop mining.
  • Performance Mode – select hashrate mode:
  • High Normal and Low .
  • Fast Boot Switch – speed up startup.
  • Miner API Switch – use the API interface to get different states of the miner and change parameters.
  • Restore DHCP – restore dynamic IP (DHCP) settings.
  • Leds Control – determine the location of the miner by giving a light signal.
  • Protection Mode – SSH mode.
  • Restore Factory Setting – restore factory settings.
  • Adjust Freq – miner overclocking control.
  • Export Log – export the device operation log. The log includes files: upfreq_test.log , power.log , Miner.log , system.log and api.log .
  • Web Pools Switch – configure pools through a web interface.

Troubleshooting

Can’t see ASIC

Try the following steps:

  • Switch the Internet port on which the asic is from 100 megabits to 10.
  • Try a different version of the app.
  • Change your router.
  • If you connect the device directly to a computer, the Internet Sharing service must be enabled. Then the ASIC will receive an IP address from the computer via DHCP.

Also do the following steps:

  1. Check if the running computer is on the same network as the miners.
  2. Check the status with the alarm LED.
    • Network port signal: yellow always on, green flashing.
    • Restart the miner and find the IP address again.
    • Reset the miner (press the “RESET” button for 3 seconds until the red-green light flashes). Then find the IP address again.
    • Replace the miner control board to determine if another control board is working.
  3. Check if the router’s DHCP function is enabled.
  4. Allow the device to automatically obtain an IP.

For example, when you get error code 540 on one device, it means that the SM0 hash board cannot work properly. You can do this: turn off the power, swap SM0 and SM2 hash boards, then reboot the miner to check if the board is really bad, if the error code has changed to 542, it means the hash board has a problem, if the error code is not changed, it means that the adapter plate has a problem. The best result is that the error code is gone, this means only a connection problem.

If all else fails, use an alternativeactive programs.

Alternatives

For MAC devices, use the ASIC Hub.

Foreman has all the features of WhatsminerTool and also allows you to manage each miner.

Fing is a powerful network scanner with good functionality.

Web version in browser

You can make settings in the web version directly in the browser.

For the initial setup, simply launch an Internet browser (for example, Chrome) and enter the IP address of the miner.

If you enter the address correctly, you will be shown a page similar to the one below and you will be prompted for a username and password. The username and password on Whatsminer devices is “root” by default.

First, enter the miner settings page and go to the “CGMiner” section from the “Configuration” tab.

In this step, enter information about the pool you want to connect to. To get information about a pool, you should visit the website of the desired pool.

SSH

To enable SSH, you need to enable Protection Mode in the Remote Ctrl window.

In earlier versions of the utility there was an Enable SSH setting. It is missing in the newer versions. The fact is that new ASIC models come with SSH disabled by default, so it is unlikely that you will get SSH access to them.

When SSH is enabled, there is a security issue.

Most viruses and hacks happen over SSH, so most vendors have started disabling SSH in order to provide less support to their customers/victims of SSH hacks.

Conclusions

WMT has the following features:

  1. Ability to view the list of Whatsminer devices in real time.
  2. Ability to set the IP range to view miners.
  3. Ability to update the firmware (software) of devices.
  4. Ability to change groups of miners.
  5. The ability to group change the password of all miners at the same time for greater security.

Whatsminer overclocking gain up to 40% hashrate with one simple upgrade

In this video we introduce a new power supply kit for the Whatsminer asic the kit works with all #whatsminer M2X M3X and M5X series.

Releases and versions

  • The new WhatsMiner requires this version of the tool to monitor and update the firmware.
  • The M5x and M3x series are the only ones that can support High mode and require an input voltage of more than 230V. Some features may only be supported by the new firmware.
  • The tool has a power limit function that can be set manually.
  • Multiple DNS proxy servers are supported.
  • Compatibility and stability of the tool have been improved, and the problem found by the antivirus software has been resolved.

Old versions of the program:
8.1.30

MICROBT WhatsMiner M50S++

Please make payment according to the prompts after submitting the order.

2、 Upload credentials

Please complete the payment awithin 24 hours after submitting the order, and find the corresponding order on the “My Order” page to upload the “Payment Voucher”, filling in the true payer and payment amount.

3、 Contract and invoice

According to relevant laws and regulations of the Tax Law of the People’s Republic of China, valid value-added tax invoices can only be issued if the purchaser, payer, and invoice title of the contract are consistent. If the three are inconsistent or if there are multiple payers in a contract, the contract and invoice for the order cannot be provided.

4、 Risk reminder

Based on industry factors, there is a possibility that the price of this product may rise or fall due to fluctuations in the price of virtual goods. Payment indicates that the purchaser has locked in the quantity and price of this order and voluntarily assumes the risks and benefits that may arise from the market. Payment cannot be refunded or returned

Being honest with customers is a consistent attitude of MicroBT. MicroBT promises to provide users with a one-year warranty period and repair services within the warranty scope. After purchase, it is considered as recognition of this policy.

The following products are not covered by our warranty

1. Products that are damaged due to failure to install products according to specifications, such as randomly lifting, pulling, picking, lifting, or smashing, resulting in component detachment, unstable links, circuit board circuit breakers, etc;

2. Products that were not properly shelved due to improper operation, including but not limited to products that were damaged due to reverse insertion, insufficient insertion, or non insertion of the circuit;

3. Unauthorized disassembly, modification, or repair of damaged products without written or electronic authorization from Party A;

4. Products that use unofficial designated accessories that result in insufficient computing power or damage due to mismatch, including but not limited to power supplies, control boards, fans, cables, etc;

5. Products that use unofficial supporting software, resulting in inability to increase computing power, abnormal computing power, machine jamming, and machine burning;

6. Products that modify their operating parameters (such as overclocking) on their own, resulting in a shortened service life or direct damage to the product;

7. Damage caused by failure to use electricity, power grid, and environment in accordance with the specifications, including but not limited to humid environments, corrosive environments, ultra-high temperature environments, dust particles, abnormal voltage and current (surges, impacts, instability), etc;

8. Products whose serial numbers have been maliciously modified, defaced, or intentionally removed;

9 Damage caused by natural disasters, including but not limited to earthquake, fire, rainstorm, sand storm, etc.

Що Майніт WhatsMiner

An application-specific integrated circuit, or ASIC, is a microchip designed and manufactured for a very specific purpose. ASICs designed for Bitcoin mining were first released in 2013. For the amount of power they consume, they are vastly faster than all previous technologies and already have made GPU mining financially unwise

WHATSMINER ADVANTAGE

Whatsminer is a ASIC based Plug & Play Bitcoin Mining hardware appliance. It allows you to start mining Bitcoin or Bitcoin Cash immediately and jump into the new digital gold rush.We are happy to announce we have successfully finished the integration of osTicket support ticketing system into our Whatsminer.net website.