Скільки коштує Вейп Jelly-Box Nano

0 Comments

The Rincoe Jellybox Nano Kit: An MTL Flavor Extravaganza

Price Range: $27.99 – $43.99 Battery Capacity: 1000mAh Wattage Range: 10W – 30W Colors: Full Clear, Black Clear, Amber Clear, Mocha Clear, Blue Clear Works with:

  • Exceptionally good flavor and airflow
  • Good build quality
  • Decent juice capacity with side refilling slot
  • Battery life could be better with the 0.5 ohm coil
  • Annoyingly bright lights

Starting Price: $ 27.99

The Jellybox Nano is one of the few devices out there that can handle direct lung and mouth-to-lung vaping, which makes it stand out from other devices whose manufacturers purport them to do the same. It also has other advantages that make it worth considering over other pod mods.

Table of Contents

  • Specifications Overview
  • Jellybox Nano vs. the Jellybox Mini
  • Inside the Kit
  • Build and Design Quality
  • Battery Performance
  • Using the Pod
  • The Coils
  • How to Use This Starter Kit
  • Competing Products
  • Final Thoughts

Rincoe Jellybox Nano Review

The Rincoe Jellybox Nano is a pod mod made for beginners and traveling vapers. Its small size makes it very portable, as it can fit in pockets and purses without taking up much space. Also, it is effortless to operate, as there are no power modes to worry about or infinite button combinations to remember.

It has a wattage output range of 10 to 30 watts and a decently sized battery that can provide half a day to a full day’s vaping. In addition, an LED light is incorporated into the mod so that the user can keep track of the vape’s status.

Other features include adjustable airflow, replaceable coils, and a lanyard for keeping the vape attached to you at all times.

Safety Features

  • 8-Second Auto Cut Off Protection
  • Overheating Protection
  • Low Voltage Protection
  • Charging Protection
  • Short-Circuit Protection
  • Over Charging Protection

What Is the Difference Between the Rincoe Jellybox Nano and the Rincoe Jellybox Mini?

There is much to be said in favor of the Jelly Box Mini. It has two sub-ohm coils made for direct-to-lung vaping, it has a screen, and it has a more ergonomic design that makes it more comfortable to hold and transport in a pocket. But it does not have the mouth-to-lung 1.0 ohm coil in the starter kit like the Nano.

Vapers cannot go wrong buying either vape. In fact, it might not be a bad idea to buy both. But MTL lovers should go with the Nano, and those who want DL airflow should choose the Mini.

The Rincoe Jellybox Nano Pod Kit

  • One Jellybox Nano
  • One 2.8 ml Cartridge
  • One Type-C Charging Cable
  • One 1.0 ohm Mesh Coil
  • One 0.5 ohm Mesh Coil
  • One Certificate Card
  • One Warranty Card
  • One User Manual
  • One Lanyard

Internal Build Quality and Design

The vape is very well put together, and the pod holds securely to the mod. As for the design, some users may find the see-through plastic a bit odd, but it gives the vape a bit of a retro look.

One area of criticism is that while the pod mod is small and portable, it is not very ergonomic. It would have been nice if the corners had been more rounded.

Battery

Battery performance is not bad, but it could be better. The pod mod can run for a day with the 1.0 ohm coil in the pod, but only half that with the 0.5 ohm coil, give or take an hour or two. It might have been better had they put a slightly larger battery in there.

Indicator Lights

Battery life is shown by an LED light beneath the firing button. The colors are:

  • Green: 100 to 60 percent
  • Blue: 60 to 30 percent
  • Red: 30 to 0 percent

Also, there are four LED lights at the bottom that are there for no reason but to be decorative. These lights are excessively bright, but they can be turned off.

The Jellybox Nano Cartridge

The pod holds 2.8 ml of liquid, and it is clear plastic so that the user can easily check the liquid level without having to hold the pod mod up to the light. It has a very comfortable duck-billed mouthpiece that accommodates mouth-to-lung and restricted lung vaping. Beneath the mouthpiece, there is a switch that controls the airflow. It moves back and forth, allowing the user to make the appropriate adjustments.

The pod is refilled from the side, which is something a few vapers may not like. However, judging from the placement of the mouthpiece, there was nowhere else to put the refilling port. Everyone should count their blessings that the designers did not put it at the bottom!

Jellybox Nano Coils

The starter kit comes with 0.5 and 1.0 ohm mesh coils. The lower resistance coil is for restricted lung vaping, and the higher resistance coil is for mouth-to-lung vaping. These coils do an excellent job generating high amounts of flavor, especially the MTL coil. Not only is the flavor perfect on MTL, but the airflow and temperature are just right.

Vapor Production

The restricted lung coil is flavorful, but not as much as the MTL coil. However, its advantage is that it produces a satisfying amount of vapor, and the airflow is silky and smooth.

Compatible Juices

The RDL coil requires freebase nicotine with 80/20 or 70/30 liquids, while the MTL coils require 50/50 salt nicotine liquids. The nicotine free liquids with high vegetable glycerin content will produce larger clouds, and the 50/50 variants have better flavor on low wattages.

How Long Do the Coils Last?

These coils can last up to two weeks if they are used with proper liquids and are adequately primed. Use the coils with the liquids specified above and prime them as will be shown below. If users do these things, they should get plenty of vaping time from their coils.

How to Use the Rincoe Jellybox Nano Pod Mod

No user should have any trouble figuring out how to use this pod mod starter kit. Follow these steps to get started:

  1. Prime the Coils: Choose the preferred coil and place several drops inside. Afterward, place the coil in the pod and fill the pod to capacity. Wait five to ten minutes for the coil to absorb the liquid.
  2. Changing the Coils: Change the coils by pushing or pulling them into or out of the recess in the pod’s bottom.
  3. Charging: Plug the USB-C cable into the charging port to charge the vape as needed.
  4. Refilling: Remove the pod and lift the silicone tab on the side. Use a syringe or juice bottle to top off the pod.

Use the button combinations below to operate the pod mod.

Button Combinations

  • Click the firing button five times to turn the pod mod on/off
  • Click the firing button three times to turn the bottom LED lights on/off

Competing Products

Rincoe Jellybox Nano vs. VooPoo Drag Nano

The VooPoo Nano Drag has the same box-like appearance as the Jellybox Nano, but it has a much higher resistance 1.8 ohm coil and a smaller battery. Considering the high resistance of the coil, this vape does not need a much larger battery.

However, it would be nice if there was a second coil. Also, the Drag Nano is not as good at MTL vaping as the Jellybox Nano.

Rincoe Jellybox Nano vs. Smok Acro 25W

The Smok Acro’s advantage is that it has a more ergonomic design than the Jellybox Nano, having a rounded body that fits more comfortably in hands and pockets.

While it vapes great, it comes with two of the same 0.8 ohm pods with integrated coils. Two pods with different resistances would have been much better.

Rincoe Jellybox Nano Specifications

Dimensions:54mm x 68.2mm x 19 mm
Material:Zinc alloy + PCTG + PC
Battery Type:Integrated 1000mAh
Pod Capacity:2.8mL
Wattage Output:10 to 30 Watts
Voltage:3.2 to 4.2 Volts
Coil Resistance:0.3 to 3 ohm
Charging Type:Type-C Fast Charging
Colors:Full Clear, Black Clear, Amber Clear, Mocha Clear, Blue Clear

Pros&Cons

  • Exceptionally good flavor and airflow
  • Good build quality
  • Decent juice capacity with side refilling slot
  • Replaceable coils
  • Easy to use

Скільки коштує Вейп Jelly-Box Nano

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

With its quality and elegant appearance, Rincoe Jellybox Nano Pod Mod Kit maintains a compact design, standing 54mm tall, 68.2mm wide, and a mere 19mm in depth. It has a range of coil options between 0.3ohm and 3ohm, and has two types of coils to choose from: Mesh 1.0ohm Coil and Mesh 0.5 Ohm Coil. It is capable of outputting 30 watts and 3.2 to 4.2 of voltage input from the tiny frame, a feat that exceeds the market. Though compact, the device maintains its portable design despite the fact that it houses a 1000mAh rechargeable battery that comes integrated, and you can expect a full day of vaping pleasure when using a Type-C USB port, which allows a 5V/1A charging specification. In addition, it is available for holding up to 2.8ml of E-liquid, you can refill all sorts of different juices you want, satisfying both nic salt e-liquid and freebase e-liquid. What’s more, it is constructed with a zinc alloy body and satin material finish and a PEPG tank section for durable construction. Whether you know of it, you will finally be thrilled about it.

• Capable Of Outputting 30 Watts

• 3.2 To 4.2 of Voltage Input

• 1000mAh Built-in Battery

• 4 Color Available

• Type-C Fast Charging

• Use Type-C USB Port

• Allow A 5V/1A Charging Specification

• 2.8ml E-liquid Capacity

• Zinc Alloy Body And A PEPG Tank Section